Made in the USA and carries a two-year warranty.
Easy operation and upkeep at increased heights
Even with increased height, Harmar’s CPL is engineered for fast
installation, easy operation, and is virtually maintenance-free indoors
and out. Designed with precision and care to be an incredibly
high-quality, code compliant access solution, Harmar’s Highlander series
is sure to meet your every need. Heights available from 4’ to 14’.
Features Top-mounted motor and electrical box makes servicing
easy and eliminates potential water issues Ability to
unbolt the base to get the lift through small openings
ETL Listed Available in AC and DC models
Solid platform with non-skid surface for added safety Solid
42” high guard panels Weather-resistant design for
indoor and outdoor use Constant pressure, paddle switch
controls with emergency stop button
Safety Sensors on underside of platform stop at obstructions
Stationary access ramp
Weight Capacity: 750 lb (340 kg) Platform Size: 36” x 54” x
42” Speed: 10 FPM
Harmar’s Residential Vertical Platform Lift (RPL) is a safe, smooth and
economical solution to the barriers, porches, staircases, decks and other
elevation changes can create in and around a home.
Safe,
economical solution to barriers, porches, staircases, and decks
Designed from the ground up to be as cost-efficient as possible, the RPL is
priced to be competitive with shorter units but built to accommodate most
residential applications with ease. Available in heights from 4 to 6
feet and for use indoors and out.
Features Automatic, folding access ramp Available in
AC and DC models Solid platform with non-skid surface for
added safety Solid 36” high guard panels
Weather-resistant design for indoor and outdoor use
Constant pressure, paddle switch controls with emergency stop button
Sensitive safety pan on bottom of platform stops the lift if it meets an
obstruction
ELECTROPEDIC MAC PL50 The Mac’s Vertical Home Lift PL-50 is
designed and engineered for everyday home use. It is easy to operate,
easy to install and virtually maintenance free. Every safety detail has
been carefully designed in the Mac’s Vertical Home Lift including a
non-slip platform, constant pressure switches, a low platform for easy
access, safety ramp and railing with all rolled edges. The
Mac's Vertical Home Lift PL-50 is built to meet and exceed residential
applications.
Mac's Vertical Home Lift PL-50
The
drive system uses common household current and operates in all weather
conditions, from -30 degrees to +120 degrees. The key-operated, constant
pressure switch enables you to start, stop and change directions at any
point, unlike many of the other lifts out there. The electrical system is
placed well above ground and sealed against moisture. The lift is finished
with an automotive grade powder coat to further protect the lift against the
elements.
The
Mac’s Vertical Home Lift PL-50 is sturdy enough to lift and lower up to 750
lbs and will accommodate most electric wheelchairs and scooters. In fact we
ran a PL-50 with a full 750 lb load,continuously on a cycle that lifted and
lowered the platform 1 time a minute, 60 times an hour, 1,440 times a day
with no rest. That lift ran for 3 months, outside on our roof and completed
over 129,600 cycles without fail or need for maintenance. So if you were to
use this lift 1 time a day your lift would run for over 355 years without a
single lost day!
Mac's Vertical Home Lift PL-72
You
will not find a better built product on the market for your money. We are so
sure of this that the Mac’s Vertical Home Lift PL-50 comes with a new 5 year
limited warranty, another first for this industry. With over 35 years
experience of manufacturing residential platform lift it is easy to see why
a Mac’s Vertical Home Lift PL-50 is your best and safest choice.
Make Life Accessible Again with a Mac's
Extended Vertical Lift PL-90
The
Mac’s Extended Vertical Lift is designed and engineered for everyday home
use. It is easy to operate, easy to install and virtually maintenance
free. Every safety detail has been carefully designed in the Mac’s Vertical
Home Lift including a non-slip platform, constant pressure switches, a low
platform for easy access, safety ramp and railing with all rolled edges.
The
drive system uses common household current and operates in all weather
conditions, from -30 degrees to +120 degrees. The key-operated, constant
pressure switch enables you to start, stop and change directions at any
point, unlike many of the other lifts out there. The electrical system is
placed well above ground and sealed against moisture. The lift is finished
with an automotive grade powder coat to further protect the lift against the
elements.
San Francisco Bay Area Mac's EVL-107 ADA Commercial Business Mobility
Lift
The
Mac’s Extended Vertical Lift is sturdy enough to lift and lower up to 750
lbs and will accommodate most electric wheelchairs and scooters. We have
lifting heights available up to 107", 121", 134" and beyond. The highest we
have manufactured to date is 168" rise.
The
Mac’s Extended Vertical Lift is one tough, safe, reliable and affordable
lift. Compare it against all the competition.
You
will not find a better built product on the market for your money. We are so
sure of this that the Mac’s Extended Vertical Lift comes with a 2 year
limited warranty. With over 35 years experience of manufacturing residential
platform lift it is easy to see why a Mac’s Vertical Home Lift PL-50 is your
best and safest choice.