Harmar • Vertical Platform Lift • Residential
Strong, simple access to your porch, deck or garage entry.
The VPL400-X lifts you and your wheelchair, power chair or scooter up to 53 inches with a heavy-duty 750 lb capacity. It shares the drive power and five platform sizes of Harmar's Highlander II in a straightforward package built for shorter rises, and it is assembled in the USA.
Everything you need for safe, everyday access to a raised entry, without the space a long ramp demands.
Ideal for porches, decks, patios and garage-to-house steps. For taller rises, ask us about the Highlander II.
Room for the rider and virtually any wheelchair, power chair or mobility scooter.
A 4″ x 5″ high-contrast, constant-pressure rocker control that is easy to see and easy to press. Hold up or down for the full ride.
A 90V, 2/3 HP fully sealed DC gear motor delivers a smooth, quiet and stable lift at 9.5 to 15 feet per minute.
Seal-Kor powder coat finish with stainless steel hardware resists rust and UV, standard on every unit.
Safety pan under the platform, emergency stop, overspeed brake, gate interlocks, a grab bar and a manual lowering tool.
Start with the base unit and add the options your entry needs. Call for your complete installed quote.
750 lb capacity, up to 53″ of lift, Big Blue Paddle control, platform grab bar, Seal-Kor finish with stainless hardware.
$7,195.00Keeps the lift running through a power outage so you are never stranded on the platform or locked out of your home.
$995.00Interlocked landing gate at the ground level. The lift will not operate unless the door is closed and locked.
$1,295.00Interlocked landing gate at the upper level, protecting the open edge of the porch or deck when the platform is down.
$1,295.00Prices are for equipment. Delivery, installation, permits and site preparation are quoted after a free site visit. Call 800-551-2010.
| Model | Harmar VPL400-X Vertical Platform Lift |
|---|---|
| Lift capacity | 750 lb |
| Lift height / travel | Up to 53″ |
| Speed | 9.5 to 15 feet per minute |
| Drive | 2/3 HP, 90V fully sealed DC gear motor with SteadyDrive |
| Power | 120V AC, 15 amp circuit breaker |
| Platform sizes (clear platform / guard panel) |
|
| Controls | 4″ x 5″ constant-pressure paddle control (Big Blue Paddle) |
| Finish | Seal-Kor powder coat with stainless steel hardware, rated for outdoor use |
| Standard safety features |
|
| Options |
|
| Applications | Residential: porches, decks, patios and garage entries |
| Certifications | ETL listed; CSA B44.1 / ASME A17.5-2019; safety standard ASME A18.1-2020; rated residential |
| Origin | Assembled in the USA |
| Warranty | 2-year parts |
from Harmar on the VPL400-X
Call 800-551-2010 for full warranty terms, labor coverage and service plans.
Electropedic Since 1964 • Free site visit and quote
GET A FREE QUOTE: 800-551-2010A ramp needs about one foot of length for every inch of rise, so a 24″ porch needs roughly 24 feet of ramp. A platform lift fits in a small footprint beside the steps.
With a 750 lb capacity and platforms up to 42″ x 60″, the VPL400-X fits virtually any rider and mobility device. We help you choose the right platform size during the site visit.
Up to 53 inches. For rises above that, the Harmar Highlander II reaches up to 14 feet and offers more options.
Press and hold the up or down side of the Big Blue Paddle for the whole trip. Releasing the paddle stops the lift.
Every unit includes a manual lowering tool. Add the $995 battery backup to keep running normally during an outage.
Yes. The Seal-Kor powder coat and stainless steel hardware are made for outdoor use. Regular maintenance is recommended.